
Mattress sizes in the US and Canada come in six standard dimensions: twin (38 x 75 inches), twin XL (38 x 80), full (54 x 75), queen (60 x 80), king (76 x 80) and California king (72 x 84). The UK, Australia and continental Europe use different sizes under some of the same names, so a "king" in London is narrower than a queen in Chicago.
That naming overlap is where most sizing mistakes start. A frame bought abroad, sheets ordered from an overseas shop, or a mattress inherited with no label can all be a few centimetres off, and a few centimetres is enough for a fitted sheet to pop off a corner or a mattress to rattle inside its frame.
This guide puts every standard size from four markets in one place, in inches and centimetres, then covers the questions that come after the chart: how much floor space each size needs, whether it will get through your door and up the stairs, and how to tell what size a mattress you already own actually is.
Mattress Sizes and Dimensions Chart at a Glance
If you only need the US and Canadian numbers, this table is the answer. The width and length of each size are standardised; the thickness is not, and it varies by model.
| US size | Inches (W x L) | Centimetres (W x L) | Surface area |
|---|---|---|---|
| Twin | 38 x 75 | 96.5 x 190.5 | 2,850 sq in |
| Twin XL | 38 x 80 | 96.5 x 203 | 3,040 sq in |
| Full (double) | 54 x 75 | 137 x 190.5 | 4,050 sq in |
| Queen | 60 x 80 | 152 x 203 | 4,800 sq in |
| King | 76 x 80 | 193 x 203 | 6,080 sq in |
| California king | 72 x 84 | 183 x 213 | 6,048 sq in |
The dimensions and surface areas follow the Sleep Foundation size guide, which lists the same six sizes as the ones most manufacturers make. A few of its own pages give the full as 54 x 74 inches, a reminder that one inch of drift between charts is common even inside the US.
Canada uses the same names and dimensions as the US, so the US rows apply there too. The sections below cover each size, then the UK, Australian and European charts, then a side by side comparison of the names that mean different things in different countries.
US and Canada Mattress Sizes, Size by Size
The six US sizes fall into two groups: three built for one sleeper and three built for two. The jump between the groups is bigger than it looks on paper, because a queen has almost 20 percent more surface than a full while being only 6 inches wider.
Twin and Twin XL Dimensions
A twin measures 38 x 75 inches, and a twin XL keeps the same width but adds 5 inches of length, to 80 inches. That extra length is the reason twin XL is the standard in many college dorms: a tall teenager or adult fits on it without their feet hanging off.
The two sizes take different sheets. A twin fitted sheet stretched over a twin XL will either not reach the corners or pull them down. If you are not sure which one you have, measure the length; width alone will not tell you.
Sleep Foundation puts the twin at 2,850 square inches and the twin XL at 3,040. Both suit children, teens and single adults, and the twin XL is the better fit for anyone over about 6 feet.
Full Mattress Dimensions
A full, also called a double, measures 54 x 75 inches. It is 16 inches wider than a twin but the same length, so it adds room to spread out without adding legroom.
Sleep Foundation describes the full as a common choice for solo sleepers, small bedrooms and guest rooms, and notes that it can hold two small children in a shared room. Two adults can sleep on it, but each gets 27 inches of width, about the width of a crib mattress.
Its other advantage is that it moves more easily. A full is 6 inches narrower and 5 inches shorter than a queen, which matters on a tight staircase.
Queen Mattress Dimensions
A queen measures 60 x 80 inches, or about 152 x 203 cm. It is the size most couples start with, and Sealy names the queen as the most common bed size in Australia, where the same size goes by the same name.
Compared with a full, the queen adds 6 inches of width and 5 inches of length. That second number is the one people overlook: at 80 inches, a queen is as long as a king, which suits anyone who finds 75 inches short.
Sleep Foundation describes the queen as a fit for couples without children or pets in the bed. For couples who share the bed with a dog or a toddler, the larger sizes below earn their extra floor space.
King and California King Dimensions
A king measures 76 x 80 inches, the widest standard US size. A California king measures 72 x 84 inches: 4 inches narrower, 4 inches longer.
The two have almost the same surface, 6,080 square inches for the king and 6,048 for the California king, so the choice is about shape rather than size. Sleepers who sprawl sideways get more from the king's width. Tall sleepers, and anyone who sleeps with their legs fully stretched, get more from the California king's length.
The two are not interchangeable. A king fitted sheet is too wide and too short for a California king, and frames, headboards and adjustable bases are built to one or the other. A split king, two twin XL mattresses side by side, adds up to the same 76 x 80 inches as a king and is common on adjustable bases.
UK Bed and Mattress Sizes in cm
The UK has its own set of six sizes, and none of them matches a US size exactly. The dimensions below come from Bed Advice UK, the bed industry's consumer guide.
| UK size | Centimetres (W x L) | Feet and inches |
|---|---|---|
| Small single | 75 x 190 | 2'6" x 6'3" |
| Single | 90 x 190 | 3' x 6'3" |
| Small double | 120 x 190 | 4' x 6'3" |
| Double | 135 x 190 | 4'6" x 6'3" |
| King | 150 x 200 | 5' x 6'6" |
| Super king | 180 x 200 | 6' x 6'6" |
Only the king and super king are 200 cm long; every smaller UK size stops at 190 cm. That puts a UK double 13 cm shorter than a US queen, and it is why a tall sleeper in the UK usually ends up on a king.
The names are nominal rather than exact. A "6 ft" super king is sold at 180 cm, which is closer to 5 ft 11 in, and a small double is sometimes sold as a "queen" or a "three quarter".
Retailers add their own sizes on top. IKEA UK sells a small single at 80 x 200 cm for its day beds and extendable children's beds, wider and longer than the 75 x 190 cm standard, and its mattress size guide notes that it stocks UK sizes only, not European ones.
Australian Mattress Sizes in cm
Australia uses seven common sizes, and the names overlap with both the UK and the US. The catch is that two large retailers publish slightly different numbers for the same name.
| Australian size | Sealy (cm) | Forty Winks (cm) |
|---|---|---|
| Single | 91.5 x 190 | 92 x 188 |
| Long single (single XL) | 91.5 x 203 | 92 x 203 |
| King single | 105.5 x 203 | 107 x 203 |
| Double | 138.5 x 190 | 138 x 188 |
| Queen | 152.5 x 203 | 153 x 203 |
| King | 183.5 x 203 | 183 x 203 |
| Super king | 203 x 203 | 203 x 203 |
The Sealy figures come from Sealy's size guide, which adds that its handmade mattresses can differ from the guide by up to 15 mm. The Forty Winks figures come from its own mattress and bed size guide. A 2 cm gap in length between two retailers' singles is normal, and a fitted sheet absorbs it.
Super king is the size with the least agreement. Tontine's Australian size guide puts it at about 203 x 203 cm but says the dimensions vary by maker, so measure a super king rather than trusting the name.
Two Australian sizes have no direct US equivalent. The king single, at roughly 106 x 203 cm, sits between a US twin XL and a full, and suits growing teens. The Australian king, at 183 x 203 cm, is as wide as a US California king but 10 cm shorter.
European Mattress Sizes
Continental Europe names its mattresses by their measurements: a "140" bed is 140 cm wide. The common sizes are 90 x 200 cm for a single, 140 x 200 cm for a double, 160 x 200 cm for what UK shops often sell as a "Euro king", and 180 x 200 cm for the largest standard bed.
Lengths of 190 cm and 210 cm also exist in some countries, and many European double frames hold two single mattresses side by side, such as two 90 x 200 cm mattresses on a 180 cm frame, so each sleeper can choose a different firmness.
The European sizes matter outside Europe because of furniture sold internationally. IKEA Australia sells mattresses at 140 x 200 cm and 180 x 200 cm alongside its local sizes, and those do not match the Australian double or king. A frame bought for one will not take a mattress bought for the other, so check which system a frame was built for before ordering a mattress to go in it.
Same Name, Different Bed: Mattress Sizes by Country
A size name only means something inside one country. This table lines up the names that cause the most confusion, using the figures from the charts above.
| Name | US and Canada | UK | Australia | Europe |
|---|---|---|---|---|
| Single / twin | 97 x 190.5 | 90 x 190 | 92 x 188 | 90 x 200 |
| Double / full | 137 x 190.5 | 135 x 190 | 138 x 188 | 140 x 200 |
| Queen | 152 x 203 | No standard | 153 x 203 | No standard |
| King | 193 x 203 | 150 x 200 | 183 x 203 | 160 x 200 |
| Super king | No standard | 180 x 200 | 203 x 203 | 180 x 200 |
All figures are in centimetres, width by length. Three pairs cause most of the returns:
- A UK king is closer to a US queen than to a US king. At 150 x 200 cm, it is 2 cm narrower and 3 cm shorter than a US queen, and a full 43 cm narrower than a US king.
- A European double does not fit a UK double frame. At 140 x 200 cm, it is 5 cm wider and 10 cm longer than a UK double, so it will not sit inside the rails, and a UK double mattress will slide around in a European frame.
- The US and Australian queens are nearly the same bed. At 152 x 203 cm and 153 x 203 cm, they are the closest match across any two markets, and sheets usually cross over between them.
Whatever the label says, the fix is the same: measure the inside width and length between the frame's rails and buy to that number.
Queen vs King Mattress Sizes
In the US, a king is 16 inches wider than a queen and the same 80 inches long. That gives each of two sleepers 38 inches on a king, the width of a twin, against 30 inches each on a queen.
The extra width costs floor space. Sleep Foundation puts the queen at 4,800 square inches and the king at 6,080, a 27 percent increase in surface for the bed alone. Sealy's Australian guide suggests a room of about 10 x 10 ft for a queen and about 12 x 12 ft for a king, and the clearance figures in the next section explain why the jump is two feet in each direction rather than a few inches.
The case for a king is usually about who else is in the bed: a child who climbs in at 3 a.m., a dog, or a partner whose sleep is easily broken by movement. The case for a queen is about everything else in the room, such as space for two bedside tables, a dresser that can still open, and a door that does not hit the bed frame.
In Australia, the same comparison runs 153 x 203 cm for a queen against 183 x 203 cm for a king, a 30 cm difference. Tontine describes that as giving each sleeper roughly the width of a single bed.
How Much Room Each Mattress Size Needs
The mattress is only part of the footprint. A bed frame adds to it, and you need walking space on every side you use.
Frame. A divan base matches the mattress footprint, while a wooden or metal bedstead typically adds 5 to 10 cm to both the width and the length, according to a UK guide to bed dimensions. A headboard, a footboard or a sleigh-style frame can add more, so check the frame's own outer dimensions.
Walking space. In a Homes and Gardens guide to bedroom spacing, designer Izabela Tokarski suggests 24 to 30 inches of walking space for a twin or full, 30 to 36 inches for a queen, and 36 to 42 inches for a king or California king. For a twin or full, she puts 18 inches beside the bed as the minimum. Australian and UK guides use about 60 cm on each side you get in and out of, with 45 cm as the tightest squeeze.
A Worked Example for a Queen
Take a US queen with access from both sides. The mattress is 60 inches wide. Add 30 inches of walking space on each side, the low end of the queen range, and the wall needs to be 120 inches, or 10 feet, wide before the frame and any bedside tables.
The metric version from Tontine's guide lands in the same place: 153 cm of Australian queen plus 60 cm on each side is about 2.7 m of wall. A bed pushed against one wall needs clearance only on the open side, which is how a double fits into a room about 2.2 m wide.
For length, add the frame and at least the same walking space at the foot of the bed, more if a wardrobe or dresser opens toward it. The table below uses Sealy's suggested minimum room sizes for each Australian size; the US sizes of similar width need similar rooms.
| Size | Suggested minimum room |
|---|---|
| Single, long single | 7 x 10 ft |
| King single | 8 x 10 ft |
| Double, queen | 10 x 10 ft |
| King | 12 x 12 ft |
| Super king | 16 x 12 ft |
Will the Mattress Fit Through the Door and Up the Stairs?
Room size is the question people ask before buying. The access route is the one that fails on delivery day.
Almost no mattress goes through a door lying flat. Most US bedroom doors are 30 or 32 inches wide and 80 inches tall, and US accessibility and egress rules ask for a 32 inch clear opening, measured with the door open at 90 degrees. The most common internal door in England and Wales is 762 mm wide and 1,981 mm tall, according to Door Superstore; Scottish homes more often have 726 mm doors. A US twin, at 38 inches, is wider than either.
Carry It on Its Side
Turned on its side, the only part of the mattress that has to pass between the door frames is its thickness. The width becomes the height, and that is the number to compare with the door.
A US queen on its side stands 60 inches tall, well under an 80 inch door. A king stands 76 inches, leaving 4 inches under the door's nominal height and less under the actual frame. A UK super king, at 180 cm wide, stands within a 198 cm door with only about 18 cm to spare. Measure from the door stop to the face of the open door, not the door leaf itself, because the opening is narrower than the door.
The Stairs Are Usually the Hard Part
A typical UK staircase is 86 to 90 cm wide, which is wide enough for a mattress on its side. The problem is the turn: a 200 cm mattress has to pivot at a landing, and a half-landing with walls on both sides is where kings and super kings most often get stuck. Low ceilings over steep stairs cause the same failure, because a mattress carried on its edge needs its full width in headroom.
Do not plan on folding a mattress to get it round a corner. The National Bed Federation, the UK bed makers' trade body, advises against bending or rolling a mattress that was delivered flat, because it damages the springs, and foam manufacturers warn that a fold can damage the layers inside even when it looks fine afterwards. A mattress that arrived rolled in a box was compressed by a machine at the factory and is not meant to be rolled again at home.
The same planning applies to any large piece of furniture. Our guide to getting a couch through a door covers diagonal depth, the measurement that decides whether bulky furniture fits when tipped back through a doorway.
Mattress Thickness and Why It Is Not Standard
Width and length are standardised; thickness is not. Sleep Foundation describes full mattresses as usually 8 to 14 inches thick, and the same spread applies to the other sizes. A slim foam mattress and a deep pillow top of the same size can differ by several inches.
Thickness affects three practical things. The first is sheets: a thicker mattress may need deep-pocket fitted sheets, because a standard sheet will not reach round its corners. The second is the bed's height, which changes how easy it is to get in and out of bed and whether the mattress sits above the headboard's lower edge.
The third is moving. On its side, the thickness is the dimension that passes between the door frames, so a 14 inch hybrid needs a wider gap than an 8 inch foam mattress. It also changes how a boxed mattress ships: a thicker mattress rolls into a fatter cylinder, and some brands ship a thick mattress in a wider carton than a thin one of the same size.
Bunk beds and loft beds are the exception where thickness has a hard limit. Their guard rails are designed for a mattress of a set maximum height, and IKEA, for example, excludes one of its thicker mattresses from its loft and bunk beds for that reason. Check the bed's own instructions before putting a deeper mattress on a top bunk.
How to Tell What Size Your Mattress Is
Second-hand beds, guest rooms and inherited frames often come with no label. There are three ways to find the size, from most to least reliable.
Check the Label
Most mattresses carry a sewn-in label with the size name, and sometimes the dimensions. If the label gives dimensions, trust them over the name, because the name depends on the country the mattress was made for.
Measure It With a Tape
Measure the width across the top surface from seam to seam, then the length down the middle. Round to the nearest inch or centimetre and match the result against the charts above. The pairs that are easiest to confuse are a twin and a twin XL, which differ only in length, and a king and a California king, which differ by 4 inches in each direction. For a frame, measure the inside of the rails, not the outside.
Get an Estimate From a Photo
When you are standing in a shop, browsing a listing for a used bed frame, or planning a room without a tape measure to hand, a photo estimate gives you a starting point. Primo Scale's Size Estimator returns an estimated width, height and depth for an object from one photo, and uses LiDAR depth on the iPhone models with LiDAR. Primo Scale shows its reasoning beside each estimate, so you can see what it based the figures on.
Treat a photo estimate as a way to narrow down the size class, not as the number to order sheets or a frame by. Several standard sizes differ by only a few inches, such as a full and a queen at 6 inches of width, so confirm the final figure with a tape measure before you buy.
Mattress Sizes: Key Takeaways
The six US and Canadian sizes run from a 38 x 75 inch twin to a 76 x 80 inch king and a 72 x 84 inch California king. The width and length of each are standard; the thickness is not.
The UK, Australia and Europe reuse the same names for different dimensions. A UK king is about the size of a US queen, a European double will not fit a UK double frame, and the US and Australian queens are the closest match across markets. Measure the frame rather than trusting the name.
A bed needs more floor than its mattress: a frame adds 5 to 10 cm on each dimension, and walking space adds 24 to 42 inches depending on the size. A queen with access from both sides needs a wall about 10 feet wide.
Almost every mattress goes through a door on its side, where the thickness passes between the frames and the width has to clear the door height. The stair turn is the more common failure, and folding a sprung mattress to get round it can damage it for good.


