
The dimensional weight calculation is the same at every major carrier: multiply length, width and height, then divide by the carrier's divisor. In inches, UPS daily rates, FedEx, USPS and DHL Express divide by 139 and the answer is in pounds; UPS retail rates divide by 166. In centimetres, DHL Express and FedEx international divide by 5,000 and the answer is in kilograms. You pay for whichever is greater, the dimensional weight or the actual weight.
That one formula hides the details that change the bill: when the rule applies at all, how each side is rounded, and what happens to the fraction at the end. A box that ships cheaply with one carrier can cost several pounds more with another. Below are the rules carrier by carrier, a step by step method, and worked examples you can check against your own box.
Dimensional weight calculation in one formula
Carriers price space as well as mass. A large, light parcel fills a truck or an aircraft hold the same way a heavy one does, so the carrier converts its volume into a weight and charges on that when it is higher. UPS describes dimensional weight as the amount of space a package occupies compared to its actual weight, and the number it bills on is called the billable weight.
The formula is:
dimensional weight = length x width x height / divisor
What differs between carriers is the divisor, the units and the threshold.
| Carrier | Units | Divisor | When it applies |
|---|---|---|---|
| UPS, daily rates | inches, pounds | 139 | all domestic and international packages |
| UPS, retail rates | inches, pounds | 166 | all domestic and international packages |
| FedEx | inches, pounds | 139 | US, Puerto Rico and international |
| USPS | inches, pounds | 139 | only parcels over 1,728 cubic inches |
| DHL Express | cm, kg or inches, pounds | 5,000 or 139 | every piece |
| Australia Post | metres, kg | multiply by 250 | parcels in your own packaging |
A lower divisor means a higher dimensional weight, so 139 is stricter than 166. One more piece of arithmetic is worth knowing: 139 in inches and pounds and 5,000 in centimetres and kilograms are close twins. Both work out to about 200 kg per cubic metre, which matches DHL's own statement that one cubic metre counts as 200 kg.
What changed at USPS in July 2026
The biggest recent change came from the Postal Service. According to the Postal Bulletin, from July 12, 2026 the divisor for Priority Mail Express, Priority Mail, USPS Ground Advantage and Parcel Select dropped from 166 to 139.
The same notice changed rounding. Every length, width and height is now rounded up to the next whole inch, so 12.2 inches counts as 13. The dimensional weight itself is also rounded up to the next whole pound.
What did not change is the threshold. USPS applies dimensional weight only to parcels larger than one cubic foot, which is 1,728 cubic inches. A parcel at or under that size pays on actual weight, whatever its shape. For USPS Ground Advantage Commercial, the Domestic Mail Manual adds a ceiling: if the dimensional weight exceeds 70 pounds, the customer pays the 70 pound price.
What you'll need
The calculation itself takes a minute. Getting the inputs right is most of the work.
You need the outer dimensions of the packed box, measured at its widest points, bulges and flaps included. You need the actual weight of the packed parcel from a real scale, because the comparison is always against that number. And you need to know which carrier and which rate you are paying, since UPS charges different divisors for daily and retail rates.
If you are still choosing a box, the outer dimensions printed on a carton or listed by the seller are a reasonable start. Once the item is inside and taped, measure again.
How to calculate dimensional weight, step by step
These steps work for any carrier. Only the divisor and the rounding change.
- Measure the length, the longest side, then the width and the height. UPS asks you to start at the longest point of each side.
- Round each measurement the way your carrier asks. USPS rounds every fraction up. The help pages at UPS and FedEx say to round to the nearest whole inch.
- Multiply length by width by height to get the cubic size.
- At USPS, check the cubic size against 1,728. At or below it, stop: you pay on actual weight.
- Divide the cubic size by the divisor: 139 or 166 in inches, 5,000 in centimetres.
- Round the result up to the next whole pound, or follow the weight steps on your rate card in kilograms.
- Compare the result with the actual weight. The greater of the two is the billable weight.
Step 2 deserves a note. Several shipping software guides report that UPS and FedEx moved to rounding every side up in August 2025, while the carriers' public help pages still say nearest whole inch. If your account's rate guide says round up, follow it. Rounding up in your own estimate never leaves you short at the counter.
Worked example: one box, four answers
Take an 18 by 14 by 10 inch box holding a 7 pound lamp packed in padding.
The cubic size is 18 x 14 x 10 = 2,520 cubic inches. That is above 1,728, so USPS applies dimensional weight too.
At USPS, UPS daily rates, FedEx and DHL Express in inches, 2,520 / 139 = 18.1, which rounds up to 19 pounds. At UPS retail rates, 2,520 / 166 = 15.2, which rounds up to 16 pounds. Every option bills well above the 7 pounds on the scale.
Now shave an inch off the height by choosing a 9 inch box. The cubic size becomes 2,268, and 2,268 / 139 = 16.3, which rounds to 17 pounds. Two pounds of billable weight disappear for one inch of empty space. This is why a snug box is the cheapest fix there is.
Why a small box can cost more at UPS and FedEx than at USPS
The USPS threshold creates a gap that surprises people. Take a 10 by 8 by 6 inch box holding a 1 pound item.
At USPS, the cubic size is 480 cubic inches, far under 1,728, so the parcel pays on its actual 1 pound.
At UPS, which says dimensional weight may apply to all its domestic and international package services, 480 / 139 = 3.45, rounded up to 4 pounds at daily rates. At retail rates, 480 / 166 = 2.9, rounded up to 3 pounds. FedEx applies dimensional weight to both FedEx Express and FedEx Ground packages, so it also lands on 4 pounds.
The edge case is a box that measures one foot on every side. At USPS it stays on actual weight, because the rule starts only above 1,728 cubic inches. At UPS daily rates and FedEx, 1,728 / 139 = 12.4, so a one foot cube bills at least 13 pounds even if it holds a pillow.
None of this makes one carrier cheaper overall, since the price per pound differs too. It does mean the dimensional weight calculation should come before the quote, not after it.
Metric dimensional weight: DHL, FedEx and Australia Post
Readers in the UK, Canada and Australia usually measure in centimetres, and most international services price in kilograms.
DHL's UK guidance gives the formula as length x height x width in centimetres divided by 5,000. Its own example is a 40 by 30 by 50 cm package weighing 8 kg: the volumetric weight is 12 kg, so the package is charged at 12 kg. DHL also calculates each piece separately when a shipment has several. FedEx international rates use the same 5,000 divisor in centimetres.
Australia Post calls it cubic weight and works in metres. Multiply length, width and height in metres, then multiply by 250. Their example parcel measures 50.5 by 40.3 by 30.9 cm and weighs 10 kg; its cubic weight is 15.72 kg, so that is what it is charged at. Domestic parcels are capped at 22 kg, 105 cm in length and 0.25 cubic metres.
Run one box through both. A 45 by 35 by 25 cm box is 39,375 cubic centimetres. With DHL that is 39,375 / 5,000 = 7.9 kg. With Australia Post it is 0.039375 x 250 = 9.8 kg. The factor of 250 is the same as dividing centimetres by 4,000, which makes it the strictest rule in this post.
Estimating the size before you find a tape measure
Most dimensional weight surprises happen before anyone measures: an item is bought, a box is picked, and the quote arrives later. A rough size early is enough to see whether a parcel crosses the USPS line or which divisor will hurt.
Primo Scale's Size Estimator returns an estimated width, height and depth from one photo of the box. Treat it as a rough size and weight estimate before posting, good for comparing boxes and carriers, and then measure the packed parcel with a tape measure for the label, because the carrier bills on its own measurement. For a full walk-through of the no-tape options, see how to measure a box without a tape measure.
The actual weight side of the comparison needs a real scale. Primo Scale does not weigh objects or use phone sensors. It estimates a likely range from visual analysis and reference data. Once you have both numbers, the free dimensional weight calculator on this site runs the same box through the UPS, FedEx, USPS and DHL Express rules side by side.
Common mistakes that raise the bill
Most overcharges come from a handful of habits.
Measuring the empty box instead of the packed one misses bulging sides and taped flaps, and carriers measure the parcel they receive. Rounding down a 12.2 inch side to 12 at USPS now produces a lower number than the one you will be billed for. Using the 166 divisor for a UPS account on daily rates understates the result by about a sixth.
Oversized boxes are the costliest mistake. Every extra inch multiplies across the other two sides, as the worked example showed. Filling the gap with a smaller carton, or cutting a box down, often saves more than switching carriers.
Finally, check the published limits before you pack. UPS packages can weigh up to 150 pounds and be up to 108 inches long, and anything larger may need freight. Overseas, a few cartons usually travel as shared container space, which Primo Nautic explains. FedEx publishes its formula on its dimensional weight page, and UPS on its shipping support page, so the current divisor is always one click away.
The short version
Dimensional weight is length times width times height divided by a divisor, compared with the actual weight, and you pay the greater of the two. In inches, the divisor is 139 at UPS daily rates, FedEx, DHL Express and, since July 12, 2026, USPS; UPS retail rates use 166. In centimetres, DHL and FedEx international divide by 5,000, and Australia Post multiplies cubic metres by 250.
USPS applies the rule only above one cubic foot and now rounds every side up. UPS and FedEx apply it to every package, so small light boxes cost relatively more there. The cheapest fix is almost always a tighter box, and an estimate that rounds up will not leave you short.


